Due to size and shipping requirements, please contact our sales department for pricing and shipping.
Phone: (937) 417-2871
These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self-locking at any point, eliminating the need for a separate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles.
Click on the drawing to the right to view a larger image.
…
|
Model
|
Exposed Height
|
Overall Length
|
Butt Dia.
|
Top Dia.
|
Wall
|
Max. Unflagged Wind Speed
|
Max Fagged Flag Wind Speed
|
Max. Flag Size
|
Shipping Weight
|
|
ECX20IH
|
20′
|
23′
|
5″
|
3″
|
.125
|
250 MPH
|
120+ MPH
|
5’x8′
|
92 lbs.
|
|
EC20IH
|
20′
|
23′
|
5″
|
3″
|
.188
|
315 MPH
|
120+ MPH
|
5’x8′
|
118 lbs.
|
|
ECX25IH
|
25′
|
27′
|
5″
|
3″
|
.125
|
144 MPH
|
104 MPH
|
5’x8′
|
113 lbs.
|
|
ECXA25IH
|
25′
|
27′
|
5″
|
3″
|
.156
|
192 MPH
|
117 MPH
|
5’x8′
|
123 lbs.
|
|
EC25IH
|
25′
|
27′
|
6″
|
3.5″
|
.188
|
222 MPH
|
120+ MPH
|
5’x8′
|
150 lbs.
|
|
ECX30IH
|
30′
|
33′
|
5″
|
3″
|
.125
|
110 MPH
|
75 MPH
|
5’x8′
|
128 lbs.
|
|
ECXA30IH
|
30′
|
33′
|
5″
|
3″
|
.156
|
119 MPH
|
91 MPH
|
5’x8′
|
138 lbs.
|
|
ECA30IH
|
30′
|
33′
|
6″
|
3.5″
|
.156
|
191 MPH
|
117 MPH
|
5’x8′
|
185 lbs.
|
|
EC30IH
|
30′
|
33′
|
6″
|
3.5″
|
.188
|
221 MPH
|
120+ MPH
|
5’x8′
|
195 lbs.
|
|
ECSA35IH*
|
35′
|
38.5′
|
5″
|
3″
|
.188
|
104 MPH
|
86 MPH
|
5’x8′
|
160 lbs.
|
|
ECX35IH
|
35′
|
38.5′
|
6″
|
3.5″
|
.156
|
122 MPH
|
91 MPH
|
5’x8′
|
190 lbs.
|
|
EC35IH
|
35′
|
38.5′
|
7″
|
3.5″
|
.156
|
179 MPH
|
117 MPH
|
6’x10′
|
245 lbs.
|
|
ECX40IH
|
35′
|
38.5′
|
7″
|
3.5″
|
.188
|
200 MPH
|
120 MPH
|
6’x10′
|
255 lbs.
|
|
ECA40IH
|
40′
|
38.5′
|
7″
|
3.5″
|
.156
|
200 MPH
|
91 MPH
|
6’x10′
|
267 lbs.
|
|
EC40IH
|
40′
|
44′
|
8″
|
3.5″
|
.156
|
125 MPH
|
110 MPH
|
8’x12′
|
300 lbs.
|
|
EC40IH
|
40′
|
44′
|
8″
|
3.5″
|
.188
|
171 MPH
|
120 MPH
|
8’x12′
|
317 lbs.
|
|
EC40IH
|
40′
|
44′
|
8″
|
3.5″
|
.188
|
195 MPH
|
110 MPH
|
8’x12′
|
317 lbs.
|
|
EC45IH
|
45′
|
49′
|
8″
|
3.5″
|
.188
|
154 MPH
|
107 MPH
|
8’x12′
|
342 lbs.
|
|
ECX50IH
|
50′
|
55′
|
8″
|
3.5″
|
.188
|
118 MPH
|
90 MPH
|
10’x15′
|
360 lbs.
|
|
EC50IH
|
50′
|
55′
|
10″
|
4″
|
.188
|
182 MPH
|
115 MPH
|
10’x15′
|
410 lbs.
|
|
ECX60IH
|
60′
|
66′
|
10″
|
4″
|
.188
|
122 MPH
|
90 MPH
|
12’x18′
|
520 lbs.
|
|
ECXA60IH
|
60′
|
66′
|
10″
|
4″
|
.250
|
150 MPH
|
106 MPH
|
12’x18′
|
585 lbs.
|
|
EC60IH
|
60′
|
66′
|
12″
|
4″
|
.250
|
192 MPH
|
120 MPH
|
12’x18′
|
665 lbs.
|
|
ECX70IH
|
70′
|
77′
|
10″
|
4″
|
.312
|
127 MPH
|
91 MPH
|
15’x25′
|
695 lbs.
|
|
EC70IH
|
70′
|
77′
|
12″
|
4″
|
.250
|
144 MPH
|
105 MPH
|
15’x25′
|
720 lbs.
|
|
EC80IH
|
80′
|
88′
|
12″
|
4″
|
.375
|
140 MPH
|
105 MPH
|
20’x30′
|
1-20 lbs.
|
* Increased wall thickness for greater strength.
All flagpole models marked with an (*) are now available in both one and two section styles; please specify when placing your order. If not specified, one section poles will be shipped.
AVAILABLE FINISHES:
Tilting Shoe Base Flagpoles
All of the cone tapered aluminum flagpoles with a 3”, 4”, 5” or 6” butt diameter can be supplied with a tilting shoe base. The tilting base is circumferentially welded to the base eliminating the need for a flash collar. The hinged portion of the base is held in place by (3) stainless steel, allen head and pivots on a solid aluminum pivot rod.
CLICK DRAWING TO VIEW LARGER
Shoe Base Flagpoles
All of the cone tapered aluminum flagpoles can be supplied with a shoe base mounting. The aluminum base is circumferentially welded to the flagpole shaft. A spun aluminum flash collar is supplied as standard unless otherwise specified.
CLICK DRAWING TO VIEW LARGER
Counter-Balanced Tilting Flagpoles
All of the cone tapered aluminum flagpoles can be adapted with a counter-balanced tilt system. For ease of maintenance, the counter-balanced tilting flagpole has no equal. This unique design features a steel counter-weight inside the flagpole shaft to avoid disturbing the graceful appearance of the tapered shaft. The base structure consists of two support channels welded to a base plate. The flagpole shaft is suspended by a pivot bolt and secured with a locking clip assembly.
CLICK DRAWING TO VIEW LARGER